davecara Posted December 23, 2022 Share Posted December 23, 2022 https://oldskoolsuzuki.info/archives/404 Quote Link to comment
Captain Chaos Posted December 23, 2022 Share Posted December 23, 2022 GSX-R engine might not fit in the Teapot frame, the clutch actuation is where the frame is. 1 Quote Link to comment
Captain Chaos Posted December 23, 2022 Share Posted December 23, 2022 Clutch shaft thingy is 23mm high Quote Link to comment
fatblokeonbandit Posted December 23, 2022 Share Posted December 23, 2022 It’s all easy enough, depending on the year, you might need to swop the ignition pick up, neutral switch, and alternator as the plugs are different between mk1 and later mk2, and the sups will swop straight over with pick ups, check the oil drain tubes as well as some are different. 3 Quote Link to comment
Omegasteve Posted December 23, 2022 Author Share Posted December 23, 2022 2 minutes ago, fatblokeonbandit said: It’s all easy enough, depending on the year, you might need to swop the ignition pick up, neutral switch, and alternator as the plugs are different between mk1 and later mk2, and the sups will swop straight over with pick ups, check the oil drain tubes as well as some are different. Brilliant thank you! I'm feeling pretty good about being able to get this done now! 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.