Pudzrx Posted November 22, 2022 Share Posted November 22, 2022 Won a pair of 750 slabbie wheels on the bay of eeee last week. Travelled down to Somerset yedterday and picked them up in the pissing rain , just been taking a closer look at them , spot the obvious mistake Quote Link to comment
Pudzrx Posted November 22, 2022 Author Share Posted November 22, 2022 I had already bought an 1100 rear wheel , can I use the 1100 front wheel in my 750f ? Quote Link to comment
Pudzrx Posted November 22, 2022 Author Share Posted November 22, 2022 So what I want to know is will the 1100 front wheel , 2.75 x 18 swap ok into the 750 with a 2.50 x 18 . I notice the tyre size is the same at 110 / 80 / 18 Quote Link to comment
Pudzrx Posted November 25, 2022 Author Share Posted November 25, 2022 Anyone know the answer ? Quote Link to comment
Rossco(Iceman Josros) Posted November 26, 2022 Share Posted November 26, 2022 Yes just the wheel spindle is 2mm bigger diameter my work here is done 2 Quote Link to comment
Pudzrx Posted November 26, 2022 Author Share Posted November 26, 2022 40 minutes ago, Rossco(Iceman Josros) said: Yes just the wheel spindle is 2mm bigger diameter my work here is done Thanks , much appreciated Quote Link to comment
Pudzrx Posted November 28, 2022 Author Share Posted November 28, 2022 Well they are both off for powdercoat , white. Lets hope they fit my 750 , lol Quote Link to comment
clivegto Posted November 28, 2022 Share Posted November 28, 2022 Anything will fit with a little modification Quote Link to comment
Pudzrx Posted November 30, 2022 Author Share Posted November 30, 2022 Went on the suzuki classic spares site , lists the same front wheel bearings for a gsxr750f and a gsxr 1100g , ordered some 750 bearings and we will go from there .... Quote Link to comment
Rossco(Iceman Josros) Posted November 30, 2022 Share Posted November 30, 2022 3 hours ago, Pudzrx said: Went on the suzuki classic spares site , lists the same front wheel bearings for a gsxr750f and a gsxr 1100g , ordered some 750 bearings and we will go from there .... The first F 750 had a 15mm front spindle and then the g and H and the 1100’s had 17mm so part numbers could be the same Quote Link to comment
Pudzrx Posted November 30, 2022 Author Share Posted November 30, 2022 (edited) 21 minutes ago, Rossco(Iceman Josros) said: The first F 750 had a 15mm front spindle and then the g and H and the 1100’s had 17mm so part numbers could be the same Was looking up 85 , f model , mmmm. Measured the 1100 bearings and you are right , 17mm Hopefully the ones I get are 15mm as I have an 85 gsxr 750f Edited November 30, 2022 by Pudzrx Quote Link to comment
Rossco(Iceman Josros) Posted November 30, 2022 Share Posted November 30, 2022 8 minutes ago, Pudzrx said: Was looking up 85 , f model , mmmm. Measured the 1100 bearings and you are right , 17mm Hopefully the ones I get are 15mm as I have an 85 gsxr 750f The forks could have been changed to the later ones for the 17mm spindle …… Quote Link to comment
Pudzrx Posted November 30, 2022 Author Share Posted November 30, 2022 10 minutes ago, Rossco(Iceman Josros) said: The forks could have been changed to the later ones for the 17mm spindle …… That would be confusing , I haven't even mentioned swapping the rear wheel yet for an 1100 one , lol Quote Link to comment
Pudzrx Posted February 27, 2023 Author Share Posted February 27, 2023 Right , well just to answer my own question, to swap from an 750f front wheel to a 1100g front , use the 15mm id 750 bearings , everything else is the same. 750f rear wheel to 1100g rear is basically a straight swap including the disc , sprocket carrier, spacers etc. Hope this helps others in the future. Cheers puddy 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.