Naweld Posted July 1, 2022 Share Posted July 1, 2022 (edited) What’s the best way to prime my gs1150 engine after a complete rebuild before starting the engine Edited July 1, 2022 by Naweld Miss spelled Quote Link to comment
Blubber Posted July 1, 2022 Share Posted July 1, 2022 During the rebuilt they should have used assembly lubricant - permatex 81950 or the likes - to prevent worrying about that. First engine revolutions on the startermotor only - no sparks plugs - untill the oil pressure switch light goes out. Then fire up. Quote Link to comment
Swiss Toni Posted July 1, 2022 Share Posted July 1, 2022 As above. Don’t put too much load on the motor at first. And, welcome to OSS. Quote Link to comment
Reinhoud Posted July 2, 2022 Share Posted July 2, 2022 Pour a bit of oil in the pump, turn the gears a bit, that should be alriht, the pump suck pretty good Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.