Jdeac Posted May 3, 2022 Share Posted May 3, 2022 Hi all again. Another question. Just looking over my bike. And have just noticed 1 carb top vacuum nipple is open. Is this right? Pot 4 and 3 are teed together then to bov Pot 3 to fpr Pot 1 open Turbos are new to me. And I'm just looking over things. Checking bolts hoses etc. And saw the above Quote Link to comment
Blubber Posted May 3, 2022 Share Posted May 3, 2022 1 probably was connected to the vacuumside of the fueltap. If not used, please blank it of as this effect how much the nr 1 carbs opens Quote Link to comment
Jdeac Posted May 3, 2022 Author Share Posted May 3, 2022 @BlubberWell there is no vac tap. So I shall cap it. Did think it was strange. Cheers Quote Link to comment
clivegto Posted May 3, 2022 Share Posted May 3, 2022 As said blank it off it'll run a lot better Quote Link to comment
Jdeac Posted May 3, 2022 Author Share Posted May 3, 2022 Done. And run up does sound smoother. God knows where/when that disappeared 1 Quote Link to comment
latheboy Posted May 5, 2022 Share Posted May 5, 2022 I have all mine linked together and signal the bov .. Quote Link to comment
colinworth79 Posted May 7, 2022 Share Posted May 7, 2022 Linked all mine together as well in a small manifold and take bov , boost gauge off that . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.