Gsx 1100 efe wheel options

[Evilston3r]

Hi, I just wondered if there are any wheel which fit directly on to the original forks and swinger of the efe, I'm looking for a set of three spokes really , I'm thinking bandit , 17 inch front would give a much better tyre selection 

[wraith]

I believe the b6 rear will go in the standard swingarm with not much hassle, probably get the b12 rear in with a bit more messing 

Have see 3 spoke wheels in standard forks on here before so can be done.

[TonyGee]

I put a B6 front wheel in a set of GSX1100E forks, the OEM spacers where bored out to take the B6 spindle and speedo drive.  the disc's are close to the inside of the legs but enough room to be safe. had to make calliper mount brackets for callipers.   with a bit of jiggery pokery  anything is possible  

[Evilston3r]

Cool I will have to look for some b6 stuff, think about chopping up my srad to use for parts, as I already have it, and she been written off twice, so only cost me 87 quid in total hahahah ,

[Swiss Toni]

@Captain Chaosis your man. I think his drawings are in ‘The Vault’. 

[Captain Chaos]

https://oldskoolsuzuki.info/archives/336

[wraith]

If you use the rf600 front wheel, you will get a 120 front tyre instead of the 110 on a b6.

The rf6 uses the same discs, calipers etc as the b6 just has a bigger rim  had one in a set of b6 forks on a gs1000, wheel went straight in the b6 forks and yokes with no messing

[Evilston3r]

Thank you very much , got some shopping list items now