Jump to content

1994 Turbo RF build


Recommended Posts

I welded a 1/2" x 1" bar on the plenum and installed the IAT, fuel pressure regular boost reference, wastegate bottom port and MAP boost reference .

Cooling system all done.

Basic wiring loom all done. Ignition, neutral switch, oil pressure switch, kill switch, tether switch, starter and horn button for air shifter done.

wiring the MAXXEcu next week.

And it finally stop raining ! took the Busa out for a spin.

MM

276165146_10224232169245481_2454093802358554214_n.jpg

  • Like 3
Link to comment
  • 2 weeks later...
  • 4 weeks later...

Little bit more done today.

Installed a bunch of 2 & 3 wires Deutsch connectors. Love those connectors !

All injectors connectors installed hooked up.

To do:

- Front & back wheel sensor install

- Feeds from fuse box / relays connections to MaxxEcu

- Programming & tuning

- 16 / 40 gearing 

 - The RCA 7" tablet is garbage. Will get a Samsung 8".

20220419_164607.jpg

20220424_203841.jpg

20220424_203900.jpg

Edited by 94RF1146
  • Like 3
Link to comment

My team of leprechauns made some progress on the bike...

Only things left to do are the catch cans, ECU configuration, get some E85 and startup.

I had to trim my dash plate twice. Also marked where to trim the bodywork for the BOV.

Doing that sometime this week.

We'll do configuration when my friend is available.

 

Cheers,

MM

Edited by 94RF1146
  • Like 1
Link to comment
17 minutes ago, Arttu said:

Looking good! Although I think it would have been even more cool with some RF style fairings ;)

I know Arttu. My RF fairing was damaged. The fins on the side were blocking the install, tank was too high, I couldn't tuck in properly. Only RF parts left are 1/2 the frame and the cylinder head.

She had her good looking days (2013)....

IMG_0004.JPG

Edited by 94RF1146
  • Like 4
Link to comment
4 hours ago, 94RF1146 said:

I know Arttu. My RF fairing was damaged. The fins on the side were blocking the install, tank was too high, I couldn't tuck in properly. Only RF parts left are 1/2 the frame and the cylinder head.

She had her good looking days (2013)....

IMG_0004.JPG

Tastiest RF I've ever seen, I can recall a build thread somewhere from years gone by, love this.

Was this build thread on the old Oss site?

Link to comment
6 hours ago, 94RF1146 said:

I know Arttu. My RF fairing was damaged. The fins on the side were blocking the install, tank was too high, I couldn't tuck in properly. Only RF parts left are 1/2 the frame and the cylinder head.

Yep, there are some practical reasons why most of the drag bikes look the same nowadays...

Link to comment

We got the bike started yesterday.

Few things to correct / to do

- Fuel leak

- Mark TDC on the trigger wheel

- My 28 years old starter gave up. I have a second one

- Running rich right now.

- Refill 2 CO2 bottle. Awaiting ASA shut off valve.

Love the whistle from the turbo ( GTX3576R Gen 2)

 

MM

Link to comment
  • 2 weeks later...

A friend here locally has a outer basket in his spare motor. That will save my butt!

Changing the o-rings on my injectors for thicker ones. Got a Viton o-ring kit coming.

Everything is good.

Went racing with my Busa this weekend. First time out. Lost in 3rd round, I was so close ... Finished in 3rd place in my class.

 

:)

MM

  • Like 1
Link to comment
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...