CafeDragsterEFE Posted November 18, 2021 Share Posted November 18, 2021 Hello, I have done new threads for the valve coiver bolts and I can´t find any info for the tightening for these black saft bolts. Could someone help me out? - cheers - jussi Quote Link to comment
Swiss Toni Posted November 18, 2021 Share Posted November 18, 2021 (edited) Are you talking about the cam cap bolts? If so, it’s 6.0 to 8.5 ft. lbs. Or, the cyl. head cover bolts? 6.5 to 7.0 ft. lbs Edited November 18, 2021 by Swiss Toni Quote Link to comment
Arttu Posted November 18, 2021 Share Posted November 18, 2021 (edited) In other units the cam cap bolts should be tightened to 8-12Nm And since those aren't original bolts I would check they are at least 10.9 strength. Edit: Almost missed this was oilcooled section. Numbers are for the EFE engine which seems to be in the picture if I'm not mistaken... Edited November 18, 2021 by Arttu 1 Quote Link to comment
Blubber Posted November 18, 2021 Share Posted November 18, 2021 Moved to Aircooled Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.