clivegto Posted October 26, 2021 Author Share Posted October 26, 2021 @Gpz1100_Convertyes have thought about lock-up clutch which as you say will not fit. Will do what @Fredrik_Steendid with his 500hp setup. 1 Quote Link to comment
clivegto Posted October 26, 2021 Author Share Posted October 26, 2021 As stated fek all room between clutch cover & frame 1.1mm. 2 Quote Link to comment
clivegto Posted October 26, 2021 Author Share Posted October 26, 2021 Motor does appear to be not in the centre of the frame by about 4mm and to my advantage if I move it. At least I could remove the clutch cover from the dowels and clear the frame if I shortened the dowels. 4 Quote Link to comment
Gpz1100_Convert Posted October 28, 2021 Share Posted October 28, 2021 On 10/26/2021 at 10:21 AM, clivegto said: @Gpz1100_Convertyes have thought about lock-up clutch which as you say will not fit. Will do what @Fredrik_Steendid with his 500hp setup. what did Fred do? I know there was a mod you could do back in the day with a shallow clutch pack with huge springs and hydraulic clutch .. also there used to be a different pack with springs the size of hotel sized coke cans. strip only mind given the pull on them. Mark Quote Link to comment
Gsxrsam Posted October 28, 2021 Share Posted October 28, 2021 Grumpy has the 5 spring tester clutch, if ya want to try that........ 2 Quote Link to comment
clivegto Posted October 29, 2021 Author Share Posted October 29, 2021 16 hours ago, Gpz1100_Convert said: what did Fred do? Simply uses b12 oem clutch with 2 heavy duty springs and 1 standard one. 2 Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 Been trying difrent seat units on. One it came with jacked up a bit at the back. Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 Z650 but. Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 1100 power screen. Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 1100 et. 2 Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 Cafe seat. Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 Gsxr 400. Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 (edited) Z750e I quite like this one now I have added some cardboard to the bottom of it. Also like the look of the RGV 250 one's but it's been done so many times and the Z, e one hasn't. Edited October 31, 2021 by clivegto Quote Link to comment
Captain Chaos Posted October 31, 2021 Share Posted October 31, 2021 Powerscreen one looks good too Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 8 minutes ago, Captain Chaos said: Powerscreen one looks good too Oddly it does. Gsx750es one. Quote Link to comment
clivegto Posted October 31, 2021 Author Share Posted October 31, 2021 Am liking this one as well gsxr 1000k1. 1 Quote Link to comment
matt7 Posted October 31, 2021 Share Posted October 31, 2021 1100ET for my eye's, combined with hte seat pad from the photo the follows ET tail (slope back bit of seat pad chopped orf to suit), ET unit's the only one that follows the seat rail lines. 1 Quote Link to comment
370steve Posted October 31, 2021 Share Posted October 31, 2021 one it came with jacked up looooooooks goooooood Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.