Jump to content

Oil cooler repair


Panos

Recommended Posts

A few months ago as i removed my oil cooler ( GSXR 1100 N ) one bolt stripped the threads and cracked the fitting of the oil cooler where the oil lines connect .

If i had to do it again i would just remove the lines from the sump and leave the ones on the oil cooler connected.

Recently i had the idea to cut the old fittings and have AN8 or AN10 fittings welded in place .

Anybody here done that before?DSC02089.thumb.JPG.739f3e75c2a75647ce8a8fd075cc53d9.JPGDSC02084.thumb.JPG.68aabe5e41452bbdcc7be11f93bd1458.JPG

DSC02090.JPG

Link to comment
2 minutes ago, colinworth79 said:

Yes , just welded up the holes then a an-8 fitting on top .

You didnt cut the fitting off?

I think i probably need to cut it because the crack goes all the way to the center .

Could you please post a pic of it , if it is possible ?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...