rerb Posted June 24, 2021 Share Posted June 24, 2021 Hey, I'm buttoning up the plumbing on my turbo bandit, everything going pretty smooth. But I've installed everything around the stock fuel line with the stock clamp. I've tugged on it and it seems pretty firm, and the proboost instructions didn't mention changing it. I'm curious if anyone else kept it that way or swapped it out for a new hose with an injector or hose clamp. The problem with that is it's very tight in there, and I'm not sure I could get a beefier clamp in without pulling the T and replacing it with a longer one. With probably 15 psi going to the bowls at full chat, anyone have a clue if it'll hold? Thanks. Quote Link to comment
Maggotbreath Posted June 24, 2021 Share Posted June 24, 2021 Safety wire should do the trick. Quote Link to comment
rerb Posted June 25, 2021 Author Share Posted June 25, 2021 5 hours ago, Maggotbreath said: Safety wire should do the trick. smart, good tip Quote Link to comment
clivegto Posted June 25, 2021 Share Posted June 25, 2021 Stock pipe will be alright to the fuel pump after that you want high pressure stuff. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.