Jump to content

Recommended Posts

So after a bit of an expedition up north, i have acquired some of  JB's Moto Martin.:D

I dont think ill call it Martin, Ill call it Brian:)

 

Anyway long term project this one, good starting point, and the R1 suspenders from the 7/11 I was doing, mostly fit.:tu

 

the back wheel slotted in and the front just needs new sterring head taper rollers...

The Frame is 62mm I/D, slingy stem needs 25mm top and 30 mm bottom, but luckily 25/62/17.3 mm and 30/62/17.3 mm are readily available, all be it a bit pricyO.o

 

f7zPZ7f.jpg

 

LuMKG5h.jpg

 

  • Like 15
Link to comment
21 hours ago, fatblokeonbandit said:

Not sure how but the motor is 5 mm off to the Port side!??O.o

 

better take all the spacers out and see what ive done wrong:tu

 

lOq0zsL.jpg

There’s a good chance it was like that when I had it Gary, all the mounts had been made by the previous owner and I never removed the engine or properly checked alignment. I’m sure you’ll sort her out, it’s coming along really nicely 

:tu

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...