Nigkat Posted April 24, 2017 Share Posted April 24, 2017 usually when you design something if it looks right its generally is right, your swinging arm looks far from right. I would not be comfortable using that for anything other than a door stop. Quote Link to comment
Marc clayton Posted July 22, 2020 Share Posted July 22, 2020 On 12/29/2015 at 7:09 PM, Dr Jon said: Here's the 1100 motor in the 600 frame. Very close fit but no modification needed other than replacing the 1100f breather cover on the top of the engine for the one off the 600. Engine hoist, jack and two people made lifting this engine in no trouble at all, I would hate to try the same thing without the hoist. This goes for the 750 as well, if you're swapping engines then beg, borrow or hire an engine hoist, be a total pain without it Lucky for you mine will not go in with the 600 breather cover!!! I’m gunna have to get mine cut and fabricated it just won’t have it!!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.