Jump to content

What have I brought


dirky

Recommended Posts

Hi

ive just taken the head off a slingshot 1100 engine  I brought last summer. I had noticed the head was  slightly off centre.  

Turns out the locating pins are missing as the bores have been enlarged so the pins won’t fit. Bore size is  77 mm.  

Any clues on What have I brought here..

2B8C0A9A-99A7-419B-9A1C-883E90CC3353.jpeg

Link to comment

re-measured at 78mm so standard 1127 . never seen a head with d shape dowels. thats what threw me.

finish stripping and get it down the cleaners.

cheers for the advice.

wheres the best place to go for a full gasket kit. any recommendations

Link to comment

All of the GSXR type engines had D dowels, changed from the tube type used in the GSX family.

If you can afford it a Cometic gasket set is worth paying for but get OEM oil drain tube O rings - use nothing else! Any of the decent tuners / engine builders should be able to source quality gaskets.

Link to comment
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...