Katana Bodywork on a ET

[Azov]

Hi, is it possible or how difficult is it to fit Katana bodywork, Tank, seat fairing etc onto a GSX1100 ET 

 

cheers for any advice 

Edited April 17, 2021 by Azov

[Swiss Toni]

See ‘Emperors New Clothes’ in ‘Projects’

[Azov]

cheers Toni

[R1guy]

 

[R1guy]

[Joseph]

I've seen it done on a EFE too

Bear in mind you won't quite get the katana look because the steering neck angle is different on the katana (30 degrees on the katana and 28 on the E) its not much but it makes the difference if you're picky

Then it is just a question of adding the relevant tabs where required

Edited April 17, 2021 by Joseph

[TonyGee]

this is something im thinking of doing,  dont know if i'd do it on the ET or the inazuma ? 

[Joseph]

Less work on the ET since the frames are really so similar

[gsx]

12 hours ago, Joseph said:

I've seen it done on a EFE too

Bear in mind you won't quite get the katana look because the steering neck angle is different on the katana (30 degrees on the katana and 28 on the E) its not much but it makes the difference if you're picky

Then it is just a question of adding the relevant tabs where required

That's why me ET handles a bit sharper than me katana !

[wraith]

Best one I've seen, was done by one of the OSS members on the old site. Gsxr with kat bodywork and he had done it that we'll you had to look twice.

As this is in the oil cooled bit 

Edited April 18, 2021 by wraith