Jump to content

Katana brake pedal


Recommended Posts

clearance issue ...... try a slabside brake pedal  . if the slines are smaller you could cut off the kat spline shaft and weld in a slabby shaft ... then bush the frame mount for the smaller shaft .

Link to post
1 hour ago, no class said:

clearance issue ...... try a slabside brake pedal  . if the slines are smaller you could cut off the kat spline shaft and weld in a slabby shaft ... then bush the frame mount for the smaller shaft . come to think of it.... the early teapots had similar brake pedals to the slabby ... you could check those too as an option .

 

Link to post

Well would you believe it ?

Managed to keep the original pedal with fitting the aftermarket pegs and billet brackets that came with the bike , spaced out from the frame slightly. Adjusted the brake pedal pushrod to get the pedal level , just gotta make the bracket to hold the meg on. 

Well happy!

Puddy  :)

20210122_143121.jpg

Link to post
3 minutes ago, no class said:

..... a guy I knew once.... rear ended a car doing that 

If you ride a classic Suzuki , then you have either done that , or nearly done that , and you're a liar if you say you haven't,  lol. 

Puddy  :)

  • Like 1
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...