Misha2001 Posted January 1, 2021 Share Posted January 1, 2021 Hey there all you gurus. A small question re the anti dive fitted to my 1983 GSX. I am looking to resto the forks, but don’t like the look of the anti dive bits. Would I be able to just blank off where the AD fitted, and just run the bike without the AD? I have seen a parts layout for these things, and it looks way too complex. Ideas / advice please? Quote Link to comment
fab Posted January 1, 2021 Share Posted January 1, 2021 No you cannot just blank it off, you have to make the blank plate thick enough so you can put a bypass oil passage on the blank plate. easiest way is just replace the bolt in the top fitting of AD ,so it stops the anti dive working. 1 Quote Link to comment
Misha2001 Posted January 1, 2021 Author Share Posted January 1, 2021 Hiya.the bolt you mentioned, is that the inlet bolt from the calliper line? Quote Link to comment
Misha2001 Posted January 3, 2021 Author Share Posted January 3, 2021 Cool, thanks for that. Much appreciated. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.