Jump to content

1127 clutch push rod size


Marc clayton

Recommended Posts

Install the case with the free-play screw removed, then install the free play screw/locknut. If the screw is too short to enable correct free play make a longer one from a SS set screw. All you have to do is cut it to length and then cut a groove in the top so a screwdriver blade goes in to enable adjustment. This all takes about 15 min and no faffing about with pushrods is required:).

  • Like 1
Link to comment
35 minutes ago, Dezza said:

Install the case with the free-play screw removed, then install the free play screw/locknut. If the screw is too short to enable correct free play make a longer one from a SS set screw. All you have to do is cut it to length and then cut a groove in the top so a screwdriver blade goes in to enable adjustment. This all takes about 15 min and no faffing about with pushrods is required:).

Not sure what you mean about the screwdriver adjustment? And cutting a grove in the top? 
this rod sits in the snail section of the sprocket engine case

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...