Jump to content

1109 Slingshot pistons into a slabside


Recommended Posts

On 11/18/2020 at 2:43 PM, Rossco(Iceman Josros) said:

I am considering putting a set of Slingshot pistons into a set of Slabby barrels ive aquirred that were ment to be standard bore but have attually been bored 2mm oversize.

has anyone done this and if so how did it work and did you need to do any other mods ??
fanx in advance :tu

According to Wiseco's catalogue 2mm overbore on 1052 is max you can go without other mods 

So good to go then   :tu

Link to comment
On 11/18/2020 at 3:43 PM, Rossco(Iceman Josros) said:

I am considering putting a set of Slingshot pistons into a set of Slabby barrels ive aquirred that were ment to be standard bore but have attually been bored 2mm oversize.

has anyone done this and if so how did it work and did you need to do any other mods ??
fanx inadvance :tu

This bolt on, but check 1) piston to cylinder clearance 2) Piston to head clearance and 3) valve to piston clearance. The effective cylinder heigth for all 1052 ccm, 1127 ccm and 1157 ccm are same. 1052 ccm got 58 mm stroke and rod length 117.4 mm (C-C).  1127 ccm and 1157 ccm got 59 mm stroke and rod length 117.0 mm (C-C)

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...