Jump to content

Teapot 600/1127


Marc clayton

Recommended Posts

Right chaps 

 

this is not going to be pretty 

Long story short 

got an 1127 lump so I’ve put it in my rat teapot 600 

used the 600 breather but clearance issues were still apparent 

so had a mate of mine weld up the inside amd then mill down the outside 

so that’s all good 

 

ive also used the loom from the 600 bike to save pulling all the wires out, but I have swapped over the cdi

 

it is running (lumpy) but that’s because it doesn’t have an air box on amd the end can was off 

 

anyway my question is can I get away with running the oil cooler from the 600 lump instead of running the 1100 cooler? 
or

will it over heat? 
 

just trying to save time in making the 1100 cooler work

EFB46158-FD72-45CE-9233-8D1CA74EDDD3.jpeg

58310851-FBA6-4239-9036-EBBDA2113C53.jpeg

481CED6D-0AC7-4875-8118-3694263C59C9.jpeg

0FDA7658-3D1E-4B82-96B0-A014411D2BE9.jpeg

Link to comment

It’s more for time to get it back up and running 

 

if I do try and use the 11 cooler 

the cooler doesn’t sit well and it touches the down pipes 

 

so I’d have to make brackets and piss about, where as I just wanted to get it back together so I can start my long term build 

 

and put my rat to one side for the time being

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...