Jump to content

1052 starter clutch advice


dirky

Recommended Posts

hi

picked up a u703 1052 motor. needs quite a few bottom end parts.

been reading through frankenstiens engine guide and he isnt sure but thinks the 1052 might have used the same starter as the 750 and 600.

possible good news as i have a clean 1988 teapot engine i already plan on nicking the casings off.  can anyone confirm this ?

also the j model 1052 has a starter clutch which on the fiche looks identical to the teapot.

anyone know  if it,s interchangable  before i pull the 600 apart to see. doubt i,m that lucky.

cheers

 

Link to comment

I'm planning on replacing my 1052 starter clutch with a 89 "750" teapot one the part numbers line up and as far as I've got the center bolt fits but waiting on a puller to get them off

The 750 one appears a bit lighter than the 1052 one and the cranks are the same (ish) in dimension

I have both and from memory the gears counts are the same for the 750 / 1052 I can take some pic's after work if you like 

but 88 is a 600 ???  so don't know  IDK 

check the parts fische for numbers I understood the 1052 and 750 were interchangeable from my research 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...