Jump to content

Teapot cylinder head interchangeability


Forced2

Recommended Posts

Hello! New here. I've searched through the forums for my answer and was not able to find much. Lost a valve seat on a teapot 750 dot head. I can not find another dot head, but I have found several 1100 heads. Can anyone tell me if any of the 1100 heads from the short stroke engines will work. I know they will bolt on but will the combustion chamber diameter work with the 750 bore. Also will valves clear cylinder bore.  I should also add this is a built engine with custom rods and pistons at 7.5:1 compression. It has been bored to 76mm. Running welded and reground cams. with blow through turbo setup. valve clearance to pistons may not be an issue. If anyone knows the fitment for a stock engine i can go from there. Thanks

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...