Jump to content

GSX750ES GETS COLD QUICKLY / TAKES LONG TO WARM UP


SATANSAM

Recommended Posts

On 9/17/2020 at 11:00 AM, SATANSAM said:

Hi there amigos,

IT's simply that. Takes about 3km's to be able to ride without the troke pulled, and when I stop the mike for abour 10 min (when the bike was screeching hot) I have to pull the stroke again.

ANY CLUES??? The bike has the muxture fine and al carbs balanced in its place.

Cheerz!
Sam.

suzi tarbena.jpeg

Quite irrelevant to the problem at hand, but - that's a fecking cool ES! 

Link to comment
On 9/22/2020 at 1:50 PM, SATANSAM said:

Nver have since bought the bike 3 years ago...And I don't think the previous owner did it eather...Doesn't sounf clacky but it could well be the thing.... CHeerz m8

OHC motors don't get clacky

They get quiet and run like crap

3 years is waay too long to not maintain your motor. 

Do you expect to do nothing and it will run?

  • Like 1
Link to comment
  • 5 weeks later...
On 9/24/2020 at 5:46 AM, BigT said:

OHC motors don't get clacky

They get quiet and run like crap

3 years is waay too long to not maintain your motor. 

Do you expect to do nothing and it will run?

You are right haha. Well, I made around 13000km, and it's now when I've done it, but the previous owner said HE NEVER DID IT IN ABOUT 40.000KM! Anyway, now it starts up much better. I found out that 3 of the valve pushers were too tight (0.10mm wouldn't fit! and the correct measurement is between 0.09 and 0.13).  Having said this, now it struggles a bit when pushing the throttle at about 4000rpm...I supose I have to adjust the mixture now and maybe balance all 4 carbureters...Lemmy know if ideas ome up!

Thanx again.

BALANCINES 3.jpeg

BALANCINES 2.jpeg

BALANCINES 1.jpeg

Link to comment
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...