swingarm swap ?

[BIGZUKI]

Do any of you guys know if the 93-1100 swingarm will fit my 1990 1100 ?

if  i  remember correctly with some mods it would work 

[Andicog]

Yes, I've fitted the wt 1100 arm to my 1100L, you need the inner bearing sleeves and spacer from your original arm, these fit into the inner bearings on the later arm to sleeve them down. As I remember the shock linkage fits, must be close as I had no engineering done! 

[Askamaskinservice]

That's not a 93 swingarm, but a 95 or newer.

[Andicog]

6 hours ago, Askamaskinservice said:

That's not a 93 swingarm, but a 95 or newer.

Could be wrong but thought all water cooled used the same frame so if the later arm fits I'd think the earlier banana type would as well. Pretty sure this was covered in previous topics. 

[Askamaskinservice]

6 hours ago, Andicog said:

Could be wrong but thought all water cooled used the same frame so if the later arm fits I'd think the earlier banana type would as well. Pretty sure this was covered in previous topics. 

That's correct.

Edited September 18, 2020 by Askamaskinservice

[Cunnerz77]

I've just fitted a 93 swingy in my 92 oil cooled. I think it looks the biz  All plugs in like lego but you do need a W rear wheel, W dog bones and the W caliper and carrier.

[dontilgon]

I’m going to read the rules.

[banoffee]

1 hour ago, dontilgon said:

I’m going to read the rules.

Good idea