Jump to content

Recommended Posts


Got a 1988 gsxr with a 1993 750 swinger fitted.

Now I would like to raise the rear some cm.

I did this before with other bikes by fitting different dogbones, but now the dogbones are connected with a tube. So I am looking for solutions how other people solves this.

Searching the internet has not solved this puzzle, no jack up kit found.

I rather do not modify the original dogbones.

Best regards,


Link to post

This is all standard Suzuki.

The solution I now thought of is changing the bracket were the top of the rear shock is mounted.

This is bolted to the frame so could be replaced without permanent altering the bike. 

If I lower the mounting point with 2.5 cm the rear will raise with +/- the same height.

The link system is linear, I measured ;) 

  • Like 1
Link to post
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...