Help me decide what to build next

[Baron]

I have problem of choosing which bike I start to modify. Idea atm is to install turbo on it and drive with mild boost <0.7. Later build big bore engine and hit some more boost.

 

What bikes I have:

 

1. White 7/11, so K 750 frame and powerscreen engine with stock 34 bst carbs and V&H exhaust.

 

2. Black stock M 1100. Stock 40mm bst carbs and all.

 

3. K 750 frame. Had blown engine, got all parts to build complete bike.

 

And what else parts I got laying:

- 115 000km driven 1127 powerscreen engine, working well.

- Older (1193) wiseco piston kit with bored cylinder. For NA use.

- Older (1193 or 1216) wiseco lower comp piston kit with bored cylinder. For turbo use.

- Carbs on shelf: RS34, bst36 (K750), bst38 (M750), bst34 (1127 powerscreen), bs34ss (GS1100G been on turbo use).

- Turbo parts: plenum, exhaust manifold, fuel regulator... Soon going to oder also td05 turbo and other necessary parts.

 

Which one would be easiest to start with?

 

 

[vizman]

All of them

[wraith]

Do the last one that's in bits

[Wee Man]

Anything as long as it's got a turbo on it 

[baldrick]

the last one- its in bits anyway and you are starting with a clean canvas

 

[Badger76]

Build number three...… it's the obvious choice and an ideal home for the new turbo 

[imago]

No, no, no, you're not thinking properly. Maybe it's the warm weather?

What you do is start looking for another bike, preferably one that has the word "project" in the advert, but when a couple come along you buy them both/all. Then in a year or so you buy a complete runner because the project bikes don't fit with the latest version of your plan. Once what started as a complete runner has sat in the garage in bits for a few months/years you sell some/all of them and a few months later start the whole process again.