kitkatman Posted June 21, 2020 Share Posted June 21, 2020 Just finished rewiring my 1981 ET, the only concern is the wire for the battery level censor. Seeing as the battery does not have the fitting for this, where does the wire go to. When the engine is started the battery warning light on the console stays on, I want it to go off as it should. Please don't say take the bulb out. Any help welcome. Thanks xxx. 1 Quote Link to comment
Captain Chaos Posted June 21, 2020 Share Posted June 21, 2020 Cut the wires to the bulb. i'll get me coat 1 Quote Link to comment
vizman Posted June 21, 2020 Share Posted June 21, 2020 Just finished rewiring 1 Quote Link to comment
richyrich Posted June 21, 2020 Share Posted June 21, 2020 Connect it to the side stand switch Quote Link to comment
inazumarob Posted June 22, 2020 Share Posted June 22, 2020 Connect the wire for the sensor to the battery positive terminal. The sensors are really expensive new from Suzuki but I have seen new one recently for £10 on Eblag. Quote Link to comment
Stumpy Posted June 23, 2020 Share Posted June 23, 2020 Mine never had one on but the lightbstayed out, weird or no bulb in it i suppose Quote Link to comment
vizman Posted June 23, 2020 Share Posted June 23, 2020 @Matt-ManI take it all back brother. 1 Quote Link to comment
kitkatman Posted June 23, 2020 Author Share Posted June 23, 2020 Sorted, connected to + terminal no light. Thanks for replies. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.