kja.busa Posted June 11, 2020 Share Posted June 11, 2020 Never fitted a head cooler but will be looking to on my latest engine build, so is there a definitive guide for do and donts? And any photos would be appreciated. Quote Link to comment
clivegto Posted June 11, 2020 Share Posted June 11, 2020 Made these for my head cooler. Quote Link to comment
kja.busa Posted June 11, 2020 Author Share Posted June 11, 2020 (edited) I'm assuming there's a hose that replaces the 'Y' piece at the back of the engine, up to the cooler that then once through the cooler, splits into two and into the camcover feeds? Edited June 11, 2020 by kja.busa 1 Quote Link to comment
fatblokeonbandit Posted June 11, 2020 Share Posted June 11, 2020 just drill and tap the rocker box 5 Quote Link to comment
fatblokeonbandit Posted June 12, 2020 Share Posted June 12, 2020 Just in case ive offended the Bandit Police, the engine now lives in my Teapot, using most of the same bits, and a mahoosive head cooler. 2 Quote Link to comment
dupersunc Posted June 12, 2020 Share Posted June 12, 2020 All the bits are available from Torques on Eblag for sensible money. or you can go diy like Clive or Garry. Space is tight on slabbies and slingshots for the cam cover fittings. Period race bikes ran the main cooler on the head circuit and auxiliary cooler on the main circuit. go an8 for the cooler and bloc fittings, an6 from cam cover in to a an6-an8 y piece. 3 Quote Link to comment
kja.busa Posted June 12, 2020 Author Share Posted June 12, 2020 (edited) Thanks guys, much appreciated, a picture makes everything easy, and the info is invaluable. Edited June 12, 2020 by kja.busa Quote Link to comment
clivegto Posted June 12, 2020 Share Posted June 12, 2020 Dug this old one out for pictures. 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.