B12 Float Height

[Ted M]

I have a B12 with mk2 carbs fitted. I have fitted a Dynojet and the instructions recommend a float height of 11 - 11.5 mm so I did this and then measured all 4 carbs with clear plastic tube and the float bowl drain hole. The good news is that there was no leaks and all 4 carbs had the same fuel height in the bowl. 

Here’s the catch I think the fuel height is too high. 

I have put a photo of the height from the outside. Could someone with experience/knowledge of this let me know whether I’m too high or indeed too low. 
 

many thanks in advance

[Duckndive]

Mr Suzuki he say 14.6 +/- 1mm 

[Ted M]

Cheers mate I realise this but Dynojet say 11 to 11.5 mm in the instructions. Am I right in thinking that the Suzuki way would mean a lower fuel level

[Jaydee]

2 hours ago, Duckndive said:

Mr Suzuki he say 14.6 +/- 1mm 

That's for the mk.1 bandit 12. The mk.2 has a different set of carbs.

The dynojet data is spot on for mk.2 carbs. Think the mixtures screw are around 3.5 turns out as standard (mk.1 carbs would be 2 to 2.5 turns out)

[Ted M]

I’ve got the mk2 carbs with Dynojet fitted mate. I’ll give them a try tomorrow and see what they run like on the Dynojet settings