Jump to content

Help identify this Ohlins shock


HWB

Recommended Posts

23 minutes ago, Jaydee said:

See where I'm pointing? That's the part you measure for piston diameter.

20200506_202611.jpg

Yes i know but if you look again at the pic i posted the kit says 19mm shaft 46mm piston 49mm reservoir so i was referring to the reservoir because when i measured the od it looks to be 51mm does that imdicate 49mm id ?

Link to comment

This is my first ever attempt at rebuilding a shock so thanks for the support i WILL not be able to successfully go through all the steps without your feedback so thanks again. 

I ordered the rebuild kit now its just waiting..

Cheers

Link to comment
  • 3 weeks later...
On 5/6/2020 at 11:52 PM, Jaydee said:

Had a look at a couple of spare Ohlins I have. This shock shown is a gsxr 1100 item so this confirms the codes were superseded with new ones.

SU8050 is now SU003 (gsxr750 88-95)

SU9050 is now SU002 (gsxr1100 89-98)

20200506_202619.jpg

Hey Jaydee any idea of the torque spec for the shaft nut ? 

Link to comment

Jaydee quick question, when refilling the body does the ifp need to be seated all the way at the bottom of the reservoir ? Also should it have a slight pressure to make bleeding quicker ? Any tips from anyone knowledgeable please ? Need to know the final steps  

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...