richyrich Posted April 12, 2020 Share Posted April 12, 2020 Can I bolt on my gsf600 carbs ? I think they're 33mm . My 750 et doesn't make the power it should after it lost its air box sometime in the past. It's got the manifold and the single large foam filter on currently. I suppose the real question is , what carbs does that model have and can someone link me to the correct type jets . Cheers Quote Link to comment
Dezza Posted April 12, 2020 Share Posted April 12, 2020 Measure the external diameter of one of the carb inlet stubs and the internal diameter of one of the inlet rubbers. If these are roughly the same hold the carbs up to the rubbers. Oil cooled carbs have the same spacings as the carbs for the larger air-cooled machines (1000 + 1100); my guess is the 750s are the same so if the rubbers and inlets match the carbs should go on. Getting the cables and jetting right afterwards though is another matter. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.