Jump to content

vm29 parts


arit

Recommended Posts

Hi all,

 

Looking to rebuild mine and missing a vacuum air screw. Can't seem to find one via most of the sellers out there ie wemoto etc... are these screws along with other items ie float bowl drain screws the same as other mikuni models?

Link to comment

I think you mean Pilot Screw (No19) And some markets had them to stop people fiddling with the factory settings. 

More often than not, they've been removed either to adjust richness or during a thorough clean. Like mine ;)

 

Screw them al the way in (not tight) & turn em out 2 to 2.5 turns out as a base setting. Make sure they're all the same.

 

Edited by CockneyRick
  • Like 1
Link to comment

Cheers mate, Its the one in the pic attached - silver sleeve. Also whats the brass one to the left? does it come out or is it pressed in?

 

also I have heard 1/2 turn for the airscrew from factory and 1 1/2 and also 2 - 2 1/2 quite a range. Mine was set at almost 4 from PO but I suspect because of an overall lean condition which I'm trying to solve

Img_2212.png

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...