FazzGT550 Posted January 27, 2020 Share Posted January 27, 2020 Hi all, just after a bit of advice... Bought a 750 slingshot "Street fighter"acouple of years ago and quickly found out that it had a 750 slabby engine and CDI fitted... Wasn't too bothered as it went well enough other than a knackered clutch which I replaced and was good fun for 12 months.... Anyway long story short the slabby lump smokes it's bag off and is long overdue a rebuild, the 750 slabby flatslide carbs are a pain in the arse and I thought the easiest fix was to buy a blandit 12 lump which I have just done... Which brings me to cdi's, I can't use a bandit 12 one as I'm led to believe the plug is different, reading on here told me that I could use an 1100 CDI as the rev limit would be right and it uses the same plug as my 1988 750 slingshot loom...but.... My 750 slabby CDI that I already have has a lower rev limit than the later 750's so couldn't I just use that? Would it be compatible with the bandit 12 lump? Or would I have to swap pickups etc, I want to just bolt the engine in and find a set of suitable carbs really, don't really fancy chopping the loom about at this stage.. Sorry it's a long winded post but thanks for looking in any case Quote Link to comment
dupersunc Posted January 28, 2020 Share Posted January 28, 2020 Just swap the pick up over to the 1200 lump from the current motor and enjoy. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.