Gsx1100f engine in a gsx750w inazuma

[Chris92]

Looking for a bit of help or advice.

I have a 98 gsx750w and I've bought a gsx1100f engine. From what I've found out I believe the gsxr1100 carbs and cdi are the same as the gsx750w but the gsx1100f arnt the same. Question is could I still fit the engine and maybe run 34mm keihin carbs from my 750 on the gsx1100f that should have 34mm mikuni. Also could I change block connector on cdi to fit a different cdi or would I require a new harness. 

Never done a engine swap before so unsure on alot of it

 

[davecara]

The 1100 will run on either carbs (just fit the right carb rubbers) and either CDI.

I think the only real difference between the CDI’s is the Rev limit. Should just be a matter of swapping the plugs on the existing loom if you’re using the 1100 cdi

 

[Chris92]

Brilliant so change carb rubbers and get a 1100 cdi and change plug. I can manage that I recon. Cheers for the info 

[Fatmama]

Yes. 

 

 

And hi.