badger Posted January 10, 2020 Share Posted January 10, 2020 Yes I did a search..... Does anyone know of other bikes you can pillage with the same spacing for the hangers? Probably gonna get some Chinesey ones but that'll fit I know 02 zx6 is close but puts your pegs down a bit Worst case I'll get a new mount welded on the frame to suit and pick what ever but if I could save some drama that would be handy Cheers guys! Quote Link to comment
Katana Posted January 13, 2020 Share Posted January 13, 2020 What I have done in past is get some rearsets you like then just get some plates made up that fit the frame and rearsets. These were some i had made to fit gsxr K4 rearsets to fit a bandit 2 Quote Link to comment
Rene EFE Posted January 13, 2020 Share Posted January 13, 2020 https://www.ebay.co.uk/str/racesuppliesdirect Send this guy an email. His rearsets have saved the Banana twice already; highly recommended. Quote Link to comment
badger Posted January 13, 2020 Author Share Posted January 13, 2020 @Katanaare they Chinese rearsets? If so do you rate them? @Rene EFEthanks dude! Ideally after something a little prettier. The race supplies stuff is good quality! Thanks guys Quote Link to comment
Dezza Posted January 13, 2020 Share Posted January 13, 2020 Maybe some 2nd hand Harris rearsets? The actual pegs and pedals are all much of a muchness and just need mounting plates for a particular bike which are fairly strightforward to make or have made. Quote Link to comment
MeanBean49 Posted January 13, 2020 Share Posted January 13, 2020 40 minutes ago, badger said: @Katanaare they Chinese rearsets? If so do you rate them? @Rene EFEthanks dude! Ideally after something a little prettier. The race supplies stuff is good quality! Thanks guys They are made by a good old boy in deepest darkest Norfolk Really nice fella Quote Link to comment
MeanBean49 Posted January 13, 2020 Share Posted January 13, 2020 I need to have a look at the spacing, ive just bought a job lot of zx6 race rearsets IIRC K1 GSXR spacing is pretty much the same Quote Link to comment
Katana Posted January 14, 2020 Share Posted January 14, 2020 I was stunned at the quality really good and only £56 I know a few lads that use them on there race bikes as not end of world if they get broken Quote Link to comment
badger Posted January 15, 2020 Author Share Posted January 15, 2020 Zx6 ones are super close but just off. Quite by accident I picked out the wrong one working on my ninja! I'll probably go for k1 ones. If they're much different I'll probably get the frame mounts rewelded. Its off to the fab dude soon for some yokes! Thanks guys! Quote Link to comment
Sandman Posted January 18, 2020 Share Posted January 18, 2020 On 1/13/2020 at 1:19 AM, Katana said: What I have done in past is get some rearsets you like then just get some plates made up that fit the frame and rearsets. These were some i had made to fit gsxr K4 rearsets to fit a bandit Why making a bracket on a bracket? 1 Quote Link to comment
davecara Posted January 19, 2020 Share Posted January 19, 2020 On 1/13/2020 at 10:45 AM, MeanBean49 said: I need to have a look at the spacing, ive just bought a job lot of zx6 race rearsets IIRC K1 GSXR spacing is pretty much the same Ooh I need some rearsets for my slabby Quote Link to comment
MeanBean49 Posted January 19, 2020 Share Posted January 19, 2020 6 hours ago, davecara said: Ooh I need some rearsets for my slabby Measure the bolt spacing mate, will see what ive got Quote Link to comment
davecara Posted January 19, 2020 Share Posted January 19, 2020 1 hour ago, MeanBean49 said: Measure the bolt spacing mate, will see what ive got Slabbys are asymmetric so what ever I use I’ll be making adaptors for! Quote Link to comment
MeanBean49 Posted January 19, 2020 Share Posted January 19, 2020 Ahh ok, sure i can put a set together then Quote Link to comment
Katana Posted February 5, 2020 Share Posted February 5, 2020 On 1/18/2020 at 1:58 PM, Sandman said: Why making a bracket on a bracket? If you can’t work it out no point trying to explain Quote Link to comment
Sandman Posted February 6, 2020 Share Posted February 6, 2020 16 hours ago, Katana said: If you can’t work it out no point trying to explain I am working on a similar modification, but with only one bracket. So, please explain. Quote Link to comment
clivegto Posted February 6, 2020 Share Posted February 6, 2020 5 hours ago, Sandman said: I am working on a similar modification, but with only one bracket. So, please explain. Quote Link to comment
Katana Posted February 7, 2020 Share Posted February 7, 2020 There so you can set the pegs at what ever height suits Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.