jim Posted December 3, 2019 Share Posted December 3, 2019 hello, I have a 1998 B12. I am wondering if the sprocket cover is the same as a 1989-92 GSX-R 1100 Quote Link to comment
rdubandit Posted December 4, 2019 Share Posted December 4, 2019 Part numbers are different, but that doesn't mean they aren't interchangeable. I'm certain you'll get a definitive answer on this. Quote Link to comment
jim Posted December 4, 2019 Author Share Posted December 4, 2019 Thanks, I hope that someone can help Quote Link to comment
Captain Chaos Posted December 4, 2019 Share Posted December 4, 2019 Welcome on OSS. covers are not the same but can be swapped. Clutch pushrod will probably also need to be replaced. Quote Link to comment
wraith Posted December 4, 2019 Share Posted December 4, 2019 Covers can be swapped between all the oil cooled motors, even the cable clutch ones, the slave cylinder will also swap. Quote Link to comment
davecara Posted December 4, 2019 Share Posted December 4, 2019 But you will need to make/buy/experiment with push rods Quote Link to comment
Swiss Toni Posted December 4, 2019 Share Posted December 4, 2019 Read 'Frankensteins Pages' in the vault. It's all in there! And welcome to OSS, by the way! 1 Quote Link to comment
wraith Posted December 4, 2019 Share Posted December 4, 2019 I think the push rods are the same for the 1127 motors and b12? I think it's when you convert from hydraulic to cable where the push rods need making up. Quote Link to comment
fatblokeonbandit Posted December 4, 2019 Share Posted December 4, 2019 B12 rod is 80 mm 1127 is 100 or 102 mm depending on year 4 Quote Link to comment
jim Posted December 5, 2019 Author Share Posted December 5, 2019 Thank you for the info. It’s great Quote Link to comment
jim Posted December 5, 2019 Author Share Posted December 5, 2019 14 hours ago, jim said: Thank you for the info. It’s great Also how much does a set of used cams from a 1989 750 GSXR go for and how much torque is on the caps that hold the cams in. Thanks Quote Link to comment
Swiss Toni Posted December 5, 2019 Share Posted December 5, 2019 (edited) Cam price depends on condition. Torque setting for caps is: 8-12nm (6 - 8.5 ft.lbs). Edited December 5, 2019 by Swiss Toni Quote Link to comment
fatblokeonbandit Posted December 5, 2019 Share Posted December 5, 2019 Jim before spending piles of cash on go faster bits, spend £15 on a manual 6 Quote Link to comment
wraith Posted December 5, 2019 Share Posted December 5, 2019 If you want more bolt on power there's a DOT head and gsxr cams on eblag. PS we like pics of bikes on here but read the rules first Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.