bernardo Posted September 10, 2019 Share Posted September 10, 2019 I have the usual concrete carb rubber problem on my slabby. I need to get the carbs off but no amount of heat will shift them and being afraid of breaking some thing, my hacksaw is looking inviting. Not going to use them again so can I cut the rubbers off or am I missing something Quote Link to comment
clivegto Posted September 10, 2019 Share Posted September 10, 2019 More heat, you don't want bits of rubber going down the ports. Quote Link to comment
Dezza Posted September 10, 2019 Share Posted September 10, 2019 Try covering the rubbers with rags, then soaking the rags with boiling water. Quote Link to comment
Duckndive Posted September 10, 2019 Share Posted September 10, 2019 I find pushing the carbs downwards often breaks the seal.... and make sure you have the clips completely off........ Quote Link to comment
bernardo Posted September 10, 2019 Author Share Posted September 10, 2019 Thanks guys I'll give it a go. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.