Jump to content

WTF did I just buy? (GSXR engines)


Zweihammer

Recommended Posts

Since my life is little more than work and sleep this past six months, I find more time to peruse classifieds and the bay of E for items I can make myself think I need. For the lifelong projects I already have or the builds I may get to in the afterlife.

I came across a Craigslist ad for “1986,87,88 GSXR 1100 engines” for 300 bux. The pics showed a pair of engines, two extra barrels and a box of sleeves. The alternator mounts were blocked off and they had extra oil lines. They were over 125 miles away and I figured they would be gone before I could make time to get there. So I didn’t contact them. A couple weeks later and I see the same ad, but dropped down to 200. I figured it was a sign and texted them, still thinking I wouldn’t get them. Long story short, he responds the next day, we call back and forth and I commit to getting them the next day. He texted that night to let me know if I wasn’t coming, let him know, as his phone was ringing off the hook, but I was first in line. I assured him I was coming.

Six hours round trip, and 260 ‘Murican pesos later (200 for the parts, 60 for fuel), I have these two 1052s to go with my two powerscreen 1127s. My question for the experts, before I tear into these, what should I be looking for? What does and doesn’t exchange between the oil boilers? What are the good parts? I have picked up a Bandit barrel and head, machined them for a set of Busa pistons and have a base spacer I intended to put on my 1127. Would they work on these engines as well? I am not sure what is going on with these barrels on these two, either. The stock sets seem to be the two loose ones, but the ones one the engines have no markings. The back story I got from the seller was these were the back up engines for a friends dwarf racer (just like my 1127!), the fellow sold the racer and most of his worldly goods about five years ago to move to the Philippines with a girl he met online and was never heard from again, by anyone. The seller needed them out of the hangar he had shared with the guy. So, no history.

Anywho, I feel I got a deal, even if both engines need work. Looking for opinions

D3B32D6B-EA4A-46B7-8B62-85DBC692EB64.jpeg

47CB50FD-C009-46F6-9371-AF507E62B3A3.jpeg

1D12EB05-4AE5-4D5E-915A-1E9754CF9A41.jpeg

0D8D0E15-A054-4C21-9F63-58E89A83C452.jpeg

F26B02FF-F6D2-4564-879F-F52462A140BA.jpeg

  • Like 3
Link to comment
2 hours ago, Duckndive said:

DnDs dumb fact of the day xD

There was a guy on the original site that raced nitrous assisted Suzuki's he moved on to a Turbo Bus......and also moved to the Philippines or that way ..:v

 

 

Think he went to the Antilles.   Paula racing or something like that. 

  • Like 1
Link to comment
9 hours ago, Captain Chaos said:

No, I hadn’t, Thanks! I knew the good stuff would be here.

Still haven’t done anything but move them into the shop. Noticed the topmost bolt boss for the alternator is ground off both, one engine has never had numbers on the case, one has a broken mount boss on the bottom. Looking down the intakes, it looks like someone may have blended them some, they seem to match the heads nicely. Both heads look like dot heads, correct? Any benefits to using one on a turbo application? Don’t they up the CR, typically?

Link to comment
9 hours ago, Captain Chaos said:

Must have been some girl. Pics?

 

Fellow I was talking to said he never met the girl. But, his buddy, just one day, started offering to sell everything he had to people around him. Seemed happy, apparently. Two weeks later, he’s gone. His family called the guy a few times for a couple years, as no one heard from him again.

 The guy thought he was a decent enough mechanic to work on planes with him, so I don’t think I bought junk.

 I thought they’d be worth the squeeze in parts, alone. As I had just paid more than that for a stock B12 head and block.

  • Like 1
Link to comment
5 hours ago, Zweihammer said:

Both heads look like dot heads, correct? Any benefits to using one on a turbo application? Don’t they up the CR, typically?

They do and on big bored engines the CR could be through the roof but both of those look like they have barrel spacers? Optimal CR for big engine & big nitrous use is about 11:1 if you can control the timing with a degree of accuracy ;)

  • Like 1
Link to comment
  • 3 weeks later...
On 9/18/2019 at 12:16 PM, manden said:

Have you taken them apart? What did you find?

Sorry, guys, haven’t touched ‘em. I am taking what little spare time I have from work and swapping out the entire drivetrain from my wrecked GTI to it’s doppelgänger. I am without a car of my own, right now, and winter is coming.

 I can be a puss about riding in the rain too much.

Also trying to tell myself the unfinished streetfighter ‘87 GSXR1100 with an SSSA and  a radial USD front someone has advertised nearby on Craigslist for $850 is the last thing I need.

 I have a sickness.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...