Billythekidd Posted August 2, 2019 Share Posted August 2, 2019 As title, wanting to know if the srad 600 forks will go in a slabby 750, are the dimensions similar etc?? Quote Link to comment
banoffee Posted August 2, 2019 Share Posted August 2, 2019 Folks - again, remember OSS isn’t just a forum... go and look at the front page. http://oldskoolsuzuki.info/archives/category/modifications/front-end-swaps 2 Quote Link to comment
fatblokeonbandit Posted August 2, 2019 Share Posted August 2, 2019 How long do they need to be?? this is a set of 600 SRAD forks I modified to fit a bandit, with a bandit wheel to retain the speedo drive, they are 735mm ISH without the stepped home made yoke and 760mm ish with the yoke.. A slabby stem will fit straight in I believe.. This lot might be for sale soon as well.. 1 Quote Link to comment
dupersunc Posted August 2, 2019 Share Posted August 2, 2019 You need a standard bottom bearing and om of these for the top. https://www.Eblag.co.uk/itm/Tapered-roller-bearings-30x47x12-mm/291457610520?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2648 Then the Srad yokes go straight in, save for a bit of fiddling with lock stops. Not sure on lengths tough. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.