busa ash Posted February 22, 2020 Author Share Posted February 22, 2020 Bit more sourced for this build , one off harris yokes, and gsxr 1100 slingy clocks hoping to get a new bracket fabricated so it fits to fairing mount 5 Quote Link to comment
clivegto Posted February 22, 2020 Share Posted February 22, 2020 Very nice indeed 1 Quote Link to comment
clivegto Posted February 26, 2020 Share Posted February 26, 2020 @busa ashcan you tell me what size the back disc is please. Quote Link to comment
busa ash Posted February 26, 2020 Author Share Posted February 26, 2020 1 hour ago, clivegto said: @busa ashcan you tell me what size the back disc is please. 240mm rear disc suzuki bandit 1200 fitment 1 Quote Link to comment
busa ash Posted April 20, 2020 Author Share Posted April 20, 2020 Few set backs a few bits done , Dropped the oil threads came out with the drain plug , Took sump off and cleaned it to send out for repair think I will remove oil pick up bolt 2 snaps in the casings so now front end is off and cant lean bike over to be able to see the snapped bolt . Need to refit forks and wheel etc so I can sort this before I can move on Mudguard and seat collected by painter as he passes on way too work Quote Link to comment
clivegto Posted April 22, 2020 Share Posted April 22, 2020 That's a proper pain you don't need Ash. 1 Quote Link to comment
Dezza Posted April 22, 2020 Share Posted April 22, 2020 Same as always: 2 steps forward, 1 step back or even 1 step forward, 2 steps back. We feel your pain Quote Link to comment
busa ash Posted April 29, 2020 Author Share Posted April 29, 2020 Thanks guys lock down is helping get bits done , seat pad has been re done , seatunit and mudguard will be back this week so fingers crossed for a few better pictures of my progress weekend Quote Link to comment
busa ash Posted April 29, 2020 Author Share Posted April 29, 2020 Fitting of the flatslides into et inlet rubbers, takes little finess Quote Link to comment
busa ash Posted April 29, 2020 Author Share Posted April 29, 2020 Fitted and I like the look 3 Quote Link to comment
busa ash Posted April 29, 2020 Author Share Posted April 29, 2020 Fitted and I like the look , also side case finally fitted after lots of swearing as the inside of the casing was cast wrong so plenty of work with a dremel tool 4 Quote Link to comment
busa ash Posted April 29, 2020 Author Share Posted April 29, 2020 Fitted and I like the look , also side case finally fitted after lots of swearing as the inside of the casing was cast wrong so plenty of work with a dremel tool Side stand done with bigger foot 4 Quote Link to comment
busa ash Posted April 29, 2020 Author Share Posted April 29, 2020 Seat is shaped at front so dzus fasteners can be fitted 2 Quote Link to comment
Dezza Posted April 29, 2020 Share Posted April 29, 2020 Will the throttle cable adjuster foul the base of the tank? I ask as I know the bottom of a Magnum tank is close to the frame cross rail and there's just enough room for a cable to fit between the frame and tank. Quote Link to comment
clivegto Posted April 29, 2020 Share Posted April 29, 2020 Biger foot on the side stand is a really good idea. 2 Quote Link to comment
busa ash Posted May 3, 2020 Author Share Posted May 3, 2020 On 4/29/2020 at 4:16 PM, Dezza said: Will the throttle cable adjuster foul the base of the tank? I ask as I know the bottom of a Magnum tank is close to the frame cross rail and there's just enough room for a cable to fit between the frame and tank. It's close but all good dezza 1 Quote Link to comment
busa ash Posted May 3, 2020 Author Share Posted May 3, 2020 Few more bits coming together, slabby rear light fitted , colour scheme coming together now 5 Quote Link to comment
busa ash Posted May 3, 2020 Author Share Posted May 3, 2020 Seat upholstered by rydale upholstery elvington . Ì am happy with build few niggles but it's the way of any build 5 Quote Link to comment
busa ash Posted May 3, 2020 Author Share Posted May 3, 2020 As I dont like to sticker bomb a build I am going to wait till bike is off the ramp and can get some perspective , stand back and look from diffrent angles 3 Quote Link to comment
busa ash Posted May 15, 2020 Author Share Posted May 15, 2020 Glad I waited now l, wasn't happy with width of stripe also ordered a smaller 25mm for mudguard . As the other would not lay flat because of double radius of mudguard 6 Quote Link to comment
busa ash Posted May 15, 2020 Author Share Posted May 15, 2020 Also sump back from having a timesert done future proof now fingers crossed 1 Quote Link to comment
Dezza Posted May 15, 2020 Share Posted May 15, 2020 From where did you get the go-faster speed stripes? Quote Link to comment
busa ash Posted May 16, 2020 Author Share Posted May 16, 2020 (edited) On 5/15/2020 at 10:25 AM, Dezza said: From where did you get the go-faster speed stripes? Eblag dezza gulf stripe decal Tommy kat is the seller really good quality Edited May 26, 2020 by busa ash Spelling 1 Quote Link to comment
busa ash Posted May 24, 2020 Author Share Posted May 24, 2020 Well decided on something diffrent for my tank taken it to a sign writer who is going to do some artwork on the tank !, i am in no rush as just been furloughed , and also going to change the electrical set up under the tank 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.