spiderpig Posted June 28, 2019 Share Posted June 28, 2019 Well lads, looking at building a 1270 using a bandit. The stock clutch up to it? Have a powerscreen hub and plate there was reading it'll swap in but if the bandits man enough I'll leave it be. What yas reckon? Quote Link to comment
jameskat Posted June 28, 2019 Share Posted June 28, 2019 Powerscreen has a helical cut gear on the basket where as the bandit is straight cut, I know it doesn't answer your question. Quote Link to comment
spiderpig Posted June 28, 2019 Author Share Posted June 28, 2019 Ah I know that but apparently the centre swaps over to get coil spring instead of diaphragm Quote Link to comment
Duckndive Posted June 28, 2019 Share Posted June 28, 2019 5 minutes ago, spiderpig said: Ah I know that but apparently the centre swaps over to get coil spring instead of diaphragm Yes it will with a few other bits .. do a search from the main page https://oldskoolsuzuki.info/ for clutch and you will find all the info you need Quote Link to comment
fatblokeonbandit Posted June 28, 2019 Share Posted June 28, 2019 Mine was dynoed at 150 hp and has standard Suzuki plates and one Barnett HD spring, never slipped , and it spends all its time on tracks. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.