Jump to content

Gsx750es front swap


Scott

Recommended Posts

My srad front end went straight in on my 750e just had to weld in a lock stop.theres a pic on my project build page

15 hours ago, Scott said:

hi everyone ,how do I get the s rad front end to fit gsx750es, cheers

9 hours ago, NorthernBloke said:

check the all balls bearing site to see of there is an option just to swap bearings.

 

Link to comment

Yes b12 stem will be to long, you can ever as @Swiss Tonisays stop the stem but you may need to make a sleeve for the top time where the stem fits, I found with a gs stem, the top of the stem was a smaller diameter to the b12, same bearing though.

Or you could just make a (I think if I remember right) a 20mm thick spacer to go under the top yoke and above the castle nut, to space the top yoke up.I

One last thing, with all front end swaps, you may need to sort the steering locks out.

  • Like 1
Link to comment
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...