Slabside engine mounts

[IceKat]

Apart from the rear lower mount bolt being of a larger diameter on the 1100.  Are the rest of the engine mounts plates bolts the same for both 7 & 11

[Ben Slabby]

No. 

[zedhead]

Or, alternatively, yes. 

[zedhead]

Before Ben cops the hump, I'll just add some background info to my comment - I fitted a B12 into my 750 Slabbie using standard mounts, with the upper rear bolt sleeved with a piece of copper plumbing pipe; also slid a 1100K motor into a 600 Bandit after drilling out that upper rear mount to suit the larger engine bolt from the K.

I believe Ben was aluding to the fact that it's the rear upper bolt that is a larger diameter on the bigger engine...

[Ben Slabby]

Hmm, I read that as "Are the rest of the engine mounts/plates/bolts the same"?

 

Edited April 11, 2019 by Ben Slabby

[IceKat]

Sorry guys thats my bad,  badly formulating  the question 

So 1100 slabby frame 1100 1200 motor can i use the 750 engine mounting plates to fit the engine ? 

[Blue]

Sorry even I read that wrong thought I read 1100 in a 750 frame sorry  not sure how to delete 

Edited April 11, 2019 by Blue
Not reading properly

[dupersunc]

1 hour ago, IceKat said:

Sorry guys thats my bad,  badly formulating  the question 

So 1100 slabby frame 1100 1200 motor can i use the 750 engine mounting plates to fit the engine ? 

No the 1100 and 750 plates are different. need the correct plates for the frame.

 

[Blue]

Just googled gsxr1100 engine mounts & these came up, 10 miles up the road from me. Top pic is 750

[robbo_64]

Those bottom ones are expensive

[Blue]

They do look the same