Dezza Posted March 28, 2019 Share Posted March 28, 2019 Can someone please measure and then post the centre-to-centre spacing between the holes for the rearset mounts on a 750 slabside frame? Many thanks in advance Quote Link to comment
Nickel Posted March 28, 2019 Share Posted March 28, 2019 If I remember right, 750 slabside and 1100 are the same. Am I right? These are the center to center spacing of the 1100 slabside. Left and right side are different. Left one is brakelever and right one is shiftlever 1 Quote Link to comment
stellafella Posted March 28, 2019 Share Posted March 28, 2019 Got this which might help,downloaded some time ago, its the plates to put k1 rearsets on, but does have the centre to centre spacing , sizing is a little different to above 1 Quote Link to comment
clivegto Posted March 28, 2019 Share Posted March 28, 2019 This is the template I made to do my 750 frame, bothe sides are different as said above. 2 Quote Link to comment
Dezza Posted March 28, 2019 Author Share Posted March 28, 2019 Many thanks for that everyone who replied Quote Link to comment
robbo_64 Posted March 28, 2019 Share Posted March 28, 2019 We have a discrepancy Now is it 91mm or 92mm for the brake side Quote Link to comment
clivegto Posted March 28, 2019 Share Posted March 28, 2019 (edited) 17 hours ago, robbo_64 said: We have a discrepancy Now is it 91mm or 92mm for the brake side Wouldn't know, I just used the card board template in the picĀ lolĀ Edited March 29, 2019 by clivegto Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.