Glenny86 Posted March 13, 2019 Share Posted March 13, 2019 Hi there just wanted to know what options are out there for rearsets for my 7/12 project. Can you use k1 rearsets ? Cheers Quote Link to comment
wraith Posted March 13, 2019 Share Posted March 13, 2019 I think the hole spacing are different, you could make a plate that bolts to your frame and then have other holes the same as the K1 rear sets, and if you put enough holes in it, in the right spacing, you could make it into a adjustable rear set plate Quote Link to comment
Glenny86 Posted March 13, 2019 Author Share Posted March 13, 2019 Yea that does sound like a good idea but I kinda wanted to have a direct fit I don't mind drilling the holes bigger in the frame or rearsets. I would use oem ones but they a tricky to get hold of now. Quote Link to comment
R1guy Posted March 13, 2019 Share Posted March 13, 2019 1 hour ago, Glenny86 said: I would use oem ones but they a tricky to get hold of now. There’s a polished pair of oem ones , with master cylinder for £69 on the bay at the moment.... Quote Link to comment
Glenny86 Posted March 14, 2019 Author Share Posted March 14, 2019 Cheers I will have to have a look. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.