HUM Posted February 6, 2019 Share Posted February 6, 2019 (edited) Hi all I am new and rebuild a GSX 1100e can anybody tell me what is that or what is the job of this part ? located left side in front of starter relais pic´s in attchment In parts list it is called controluntit in German " Kontrolleinheit" see pic #24 HUM Edited February 6, 2019 by HUM Quote Link to comment
69chris Posted February 6, 2019 Share Posted February 6, 2019 8 minutes ago, Mark28 said: Indicator relay? self cancelling perhaps ????? Quote Link to comment
HUM Posted February 7, 2019 Author Share Posted February 7, 2019 exact thats the question , but there is an other indicator relay existing with 3 cable joints ...... Quote Link to comment
Gixer1460 Posted February 7, 2019 Share Posted February 7, 2019 3 hours ago, HUM said: exact thats the question , but there is an other indicator relay existing with 3 cable joints ...... Could be Hazards then? Unlikely but possible? Quote Link to comment
no class Posted February 7, 2019 Share Posted February 7, 2019 The 3 prong relay for hazard , 2 prong for blinker only . There are a few models with the self cancelling module .... looks like you have one on yours . 1 Quote Link to comment
Duckndive Posted February 7, 2019 Share Posted February 7, 2019 (edited) 38830-49500 , Control Unit, Turn Signal ...E22 region models Self cancelling Indicators in other words........ Just looked up the Region Code E22 is "West Germany" or it was when they were made Edited February 7, 2019 by Duckndive Quote Link to comment
HUM Posted February 8, 2019 Author Share Posted February 8, 2019 West Germany is right :-) OK thanx a lot , now IC what is this little box for . Quote Link to comment
Wolf Posted March 14, 2019 Share Posted March 14, 2019 On 2/7/2019 at 5:10 PM, no class said: The 3 prong relay for hazard , 2 prong for blinker only . There are a few models with the self cancelling module .... looks like you have one on yours . 79 gs1000e self xanseling looks similar but has two harnesses one is 4 pin and other i think is 6 pin ... Quote Link to comment
klou01 Posted May 10, 2019 Share Posted May 10, 2019 Hi all... Huge request... Has anyone or could anyone supply a photo or diagram showing the order of the coloured wires going into the socket of the above turn signal control box? Have an GSX1100 SD Katana with the same turn signal control box only it's the one thing that's never worked unless you bypass it... Purchased a new one which made no difference but noticed that the socket it plugs into has been tampered with so suspect that a previous owner has removed the pins for whatever reason and replaced them incorrectly. Many thanks in advance Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.