69chris Posted January 17, 2019 Share Posted January 17, 2019 hey guys, gsxr1100 slingy, aftermarket cooler - inlet/outlet aiming upwards or downwards ? seen various pics of aiming both ways but is there a prefered way ?? cheers Quote Link to comment
Jaydee Posted January 17, 2019 Share Posted January 17, 2019 Either way will work absolutely fine. You can mount a bottom fed cooler a touch higher (than upright) as you don't have to worry about the top mounted 180 fittings hitting off the bottom yoke when turning the bars on full lock. 1 Quote Link to comment
69chris Posted January 17, 2019 Author Share Posted January 17, 2019 Just now, Jaydee said: Either way will work absolutely fine. You can mount a bottom fed cooler a touch higher (than upright) as you don't have to worry about the top mounted 180 fittings hitting off the bottom yoke when turning the bars on full lock. ahh cheers bud, that was what i was hoping Quote Link to comment
MeanBean49 Posted January 17, 2019 Share Posted January 17, 2019 Depends what your using the bike for, i have all my fittings on top because the coolers come off quite regularly so it saves you having to draim the cooler before removing. 1 Quote Link to comment
Racer-X Posted January 18, 2019 Share Posted January 18, 2019 I'd imagine the fittings would be cheaper if it were bottom fed too. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.