Alex Posted January 1, 2019 Share Posted January 1, 2019 Hi all. Is the pcd the mk1 bandit 1200 the same as the gsxr 1100? Thanks. Quote Link to comment
fatblokeonbandit Posted January 1, 2019 Share Posted January 1, 2019 Depends which Gsxr 1100, slabbys no only 5 bolts, slingys fit ok though Quote Link to comment
Alex Posted January 1, 2019 Author Share Posted January 1, 2019 This should be ok then? Quote Link to comment
fatblokeonbandit Posted January 1, 2019 Share Posted January 1, 2019 It will fit, but what front sprocket are you planning in using with that??? Quote Link to comment
dupersunc Posted January 1, 2019 Share Posted January 1, 2019 48t is stock for gsxr1100s Quote Link to comment
fatblokeonbandit Posted January 1, 2019 Share Posted January 1, 2019 I think he's putting it on a bandit!!! They are 45 std, I ran a 47 when doing the hill climb championship and it was almost to much on std wheelbase Quote Link to comment
Alex Posted January 1, 2019 Author Share Posted January 1, 2019 (edited) I am running 14 45 at the moment,as I've jacked the bike up 50mm the chain is rubbing on the chain guide a lot. So I was thinking of running 15 48 which gives very close to my same ratio. Edited January 1, 2019 by Alex Quote Link to comment
fatblokeonbandit Posted January 1, 2019 Share Posted January 1, 2019 If you go that big check the clearance between the chain and the post that the sprocket cover sits on it might touch and grind it away, if your chain is rubbing that bad then your swinging arm angle of the dangle is too steep, id lower it a bit Quote Link to comment
wraith Posted January 3, 2019 Share Posted January 3, 2019 15t front will fit ok just but if you want to a 16t you'd have to remove the bolt and sleeve at the rear of the cover that sites between the chain Did this on a mates b6 as he wanted to run a 16t front sprocket. Quote Link to comment
wsn03 Posted January 4, 2019 Share Posted January 4, 2019 I went 1 tooth up from standard on the front sprocket, no other modifications. I had to file down one of the posts on the sprocket cover slightly to get it to fit, it was a long time ago so don't remember the details but I do remember I had to file to make it fit. As a side story was the best mod I ever made to a bike! Turned it from a pig into something nice to ride, was only a few months old and I just couldn't get along with it. It was Dek Crutchlow (Cal's Dad, years before Cal had ever sat on a race bike) who suggested it, just as I was about to trade it in for a Bonneville. I should have thought of it myself being a Club racer at the time constantly playing with gearing. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.