SFC Posted December 6, 2018 Share Posted December 6, 2018 is there anyone on here able to rebuild a turbo which has a bit of play in it , not sure what make it is as markings have been grinded off , i also have another 2 turbo's off a suburu which look much smaller but work fine......rough estimate on price for rebuild but wont be until well after xmas before i start Quote Link to comment
nitro Posted December 20, 2018 Share Posted December 20, 2018 "a bit of play" is normal to a turbo charger Quote Link to comment
Gixer1460 Posted December 20, 2018 Share Posted December 20, 2018 54 minutes ago, nitro said: "a bit of play" is normal to a turbo charger True - but when does it become out of tolerance ? If you are anywhere in the south / south coast - I'd recommend Turbo Dynamics in Christchurch - always done good work and come up with solutions to my requests - I used to spend between £200 - 250 each time including full strip, rebuild and balance, labour and parts. Even when swapping parts, the old bits had value so it's not like having to buy a whole new compressor say. Quote Link to comment
nitro Posted December 20, 2018 Share Posted December 20, 2018 I would not do something unless one of the wheels touches the housing. But then it does not mean automaticaly that the bearing has to much clearence 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.