Jump to content

Pheasantplucker

Members
  • Posts

    169
  • Joined

  • Last visited

Everything posted by Pheasantplucker

  1. looking good. Are you the fella my lad bought a rolling chassis from? near Weymouth? Remembered the ducati. Did you have a b12 motor on the garage floor?
  2. I saw one sell on Eblag earlier this year for £280
  3. I always wanted one! When I was 15 a local lad they called Bing had one, one day perhaps!
  4. Thanks for the advice. I have a few more projects on the go at the minute but the gs1100 is one I would really like to get moving. I had planned a big bore and thought I would send the crank off to someone who knows what they are doing.
  5. Hi, I have an old gs1100 motor under the bench, project leftovers! The fella I got it from took the head off to replace it but stopped there and never got around to putting it back together. Its done 50k plus. I would like to rebuild the motor and give it a little more go but I'm a little wary of doing it myself! and cant afford to have someone do it for me!! What info should I know before starting? Is there any books that anyone would recommend to help with the job? I have a workshop manual but I really could do with getting it right first time? Any advise would be gratefully received.
  6. Ta, Trying to work out a shopping list ...........on a budget!
  7. Hi, do you prefer the s&s to the mikuni?
  8. So, If the TB was mounted between the turbo and injection manifold you wouldn't need a carbon sealed turbo? Is that right? There wouldn't be any vacuum applied to the turbo by the motor when the TB is closed? Sorry for all the questions Im trying to get as much info as I can for a future project!
  9. So you need to use a carbon sealed turbo?
  10. looking at the picture of your plenum! A neat job, do you run a single butterfly with a throttle position sensor before the plenum? Home made or from another vehicle? Do you do this stuff as a job? Never ridden a turboed bike myself but reading all the builds on the forum makes me want to build something!
  11. Shit ! just when you think you have the facts straight someone throws a spanner in the works. Thanks anyway!
  12. A very helpful fella at universal turbos told me there is not enough material in a IHI turbo to machine out for a carbon seal. one down !
  13. Bloody hell that's very reasonable! I thought you were going to say £1000 or more even. So a turbo is doable on a tight budget. Thanks.
  14. specs are so hard to find theres a fella near me who's been tuning subarus for years I will drop in and have a word, he may be able to help.
  15. Didn't know about the carbon seal requirement ! There had to be a catch, I will see what carbon sealed turbos are available second hand!
  16. Hi, I am new to this site, joined to find out more details for an engine swap I intend to do on a gsx1100et I have had for a while. I have now been seduced by tales of turbocharging and I am now thinking about a GSX1100/1200 Bandit Turbo project! So, why don't I see more draw through single carb turbo conversions? like the ones that Mr Turbo used to do? I see some of you fellas have fitted draw through and injection but would a single flat slide 42mm mikuni be so bad?
  17. Hi, nice to see someone building on a budget, the sort of thing that I have to do! What do you reckon its cost so far? I have a gsx1100et that needs a bandit motor in it and you've got me thinking about turbo's now!
×
×
  • Create New...