Jump to content

GS700ES

Members
  • Posts

    34
  • Joined

  • Last visited

Reputation

7 Neutral

Personal Information

  • Location
    Carmel Indiana

Recent Profile Visitors

179 profile views
  1. I think what I will do is leave off drain plug and filler cap and oil filter for a few days then fill it up with new oil and let it run until it's warm then change it again with another new oil & filter...overkill but I will feel better. Thanks for the help guys
  2. Okay gotcha so with diesel install drain plug fill in required amount (same as oil amount) then drain? or just leave the drain plug off and flush it right through? just making sure. Appreciate the quick response
  3. I see a lot of different information on flushing an engine so I figured I better ask.
  4. I drained it. When you say flush should I just fill up with oil again and then drain that and trash it or just drain and refill. is there something in particular I should flush it with. Thanks
  5. Hey guys been a few with work but back to work on bike. Rebuilt carbs and filled tank put in storage for a week and got back out to work on and noticed fuel leaking out of carb so I knew I left prime on. Engine filled up with fuel also. How should I clean it out? Thanks for any help
  6. *Swapping regulators. Do the yellow wires need to be hooked up in any order to the new regulator? (see highlighted in attached wiring diagram photo) *Anyone know what gauge the wiring is? Thanks!
  7. I second on the 2k clear. I use it all the time and works amazing.
  8. Any suggestions on plug wires? I have a bad one so was thinking about purchasing some NGK racing cables. I see there are CR1 and CR3, which one of those would work or should I go with something else. This is the first time making a set so any pointers would be welcomed. My plug wires secondary resistance calls for 30-50 in manual and I had one set reading 23.8 and the other set in and out of 68.0. Coils were perfect & I have new plugs. Thanks
  9. Update...These worked great. Stayed away from the cheap kits. Here is link: https://www.Eblag.com/itm/361268466892?fits=Make%3ASuzuki&epid=171143182&hash=item541d4754cc:g:IEYAAOSwrw1cZaAi&amdata=enc%3AAQAIAAABEMxSEK2dGb11egs7jIHXYL55XPv6ZEv7KsRXdf%2FW3T8tg6nWc8KeIeAidvDtICIPhSW8Qy4pjHUCqIJ%2B1nLX9vm4KXLStUN9muifBB04M1bXvlLwJVvFx%2Br6CIksLPYk5iP2F26mIu5hJOZnco3VfQktgYz5JaaadreJd2sDsNKG1y7YqfJzhIASen4bJZ%2BwU0ztdFrMZhDVSW1xTjvxlr2odAYoBWfKjsn%2FKVVCTUTYD2x6dYY6RIey4gHZl8asKKTVB6VmpJsCuZWpJjB3XUZCOjcwRBqEgE%2Fm6e2h5JSpcTHWG41XWfAGzOZTNLB4KBQu7xVNqJeVhKH0XxUFAsXwOIUnKZKgwyKCSc8n4UPy|tkp%3ABk9SR8DytvuvYg
  10. Looking for carb rebuild kit for my BS32's. I looked online and through the forums and could not find any info. Does anyone have a suggestion on where I can find a kit and can I use another kit from a different year? Thanks
×
×
  • Create New...